| ردیف | عنوان مقاله | سال | نام ژورنال | نویسندگان | شماره | |
| 1 | Variable Magnetic Field (VMF) Effect on the Heat Transfer of a Half-Annulus Cavity Filled by Fe 3 O 4 -Water Nanofluid Under Constant Heat Flux | 2017 | Journal of Magnetism and Magnetic Materials | M. Hatami, J. Zhou, J. Geng, D. Jing | DOI:10.1016/j.jmmm.2017.10.110 |
توضیحات |
| 2 | Dynamic Nanoparticle Aggregation for a Flowing Colloidal Suspension with Nonuniform Temperature Field Studied by a Coupled LBM and PBE Method. | 2017 | Industrial & Engineering Chemistry Research | Dongxing Song, Mohammad Hatami, Jiandong Zhou, Dengwei Jing: | 56(38)., |
توضیحات |
| 3 | Physical Investigation on Silver-Water Nanofluid Natural Convection for an F-shaped Cavity under the Magnetic Field Effects | 2017 | European Physical Journal Plus | A. Yadollahi, A. Khalesidoost, A. Kasaeipoor, M. Hatami, D. Jing: | 132(8):340-350 |
توضیحات |
| 4 | Heat Transfer Analysis of MHD Three Dimensional Casson Fluid Flow Over a Porous Stretching Sheet by DTM-Padé | 2017 | DOI:10.1007/s40819-017-0384-7 | Majeed A. Yousif, M. Hatami, Hajar F. Ismael | DOI:10.1007/s40819-017-0384-7 |
توضیحات |
| 5 | Natural convection heat transfer in a nanofluid-filled cavity with double sinusoidal wavy walls of various phase deviations | 2017 | International Journal of Heat and Mass Transfer | Wenhui Tang, M. Hatami, Jiandong Zhou, Dengwei Jing: | 115 |
توضیحات |
| 6 | Physical optimization of a wavy porous cavity filled by nanofluids in the presence of solar radiations using the Box-Behnken design (BBD). | 2017 | European Physical Journal Plus | A. Ghorbanian, M. Tahari, M. Hatami: | 132(6)., |
توضیحات |
| 7 | Heat transfer analysis in carbon nanotube-water between rotating disks under thermal radiation conditions. | 2017 | Journal of Molecular Liquids | Mohammad Hatami, S. Mosayebidorcheh: | 240 |
توضیحات |
| 8 | Thermal-Flow Boundary Layer Analysis of Nanofluid over a porous stretching Cylinder under the Magnetic Field Effect | 2017 | Powder Technology | S.S. Nourazar, M. Hatami, D.D. Ganji, M. Khazayinejad | DOI:10.1016/j.powtec.2017.05.010 |
توضیحات |
| 9 | Optimization of Wavy Direct Absorber Solar Collector (WDASC) using Al2O3-water Nanofluid and RSM analysis | 2017 | Applied Thermal Engineering | Mohammad Hatami, D. Jing | 121 |
توضیحات |
| 10 | Numerical study of nanofluids natural convection in a rectangular cavity including heated fins. | 2017 | Journal of Molecular Liquids | M. Hatami | 233 |
توضیحات |
| 11 | Evaluation of wavy direct absorption solar collector (DASC) performance using different nanofluids. | 2017 | . Journal of Molecular Liquids | Mohammad Hatami, D. Jing: | 229 |
توضیحات |
| 12 | Heat transfer and nanofluids flow through the circular concentric heat pipes: a comparative study using least square method (LSM). | 2017 | jmcs | M. Hatami, S. Mosayebidorcheh, J. Geng, D. Jing: | DOI:10.22436/jmcs.017.02.05 |
توضیحات |
| 13 | Investigation of engines radiator heat recovery using different shapes of nanoparticles in H2O/(CH2OH)2 based nanofluids | 2017 | International Journal of Hydrogen Energy | Mohammad Hatami, M. Jafaryar, J. Zhou, D. Jing | DOI:10.1016/j.ijhydene.2017.01.196 |
توضیحات |
| 14 | Optimization of a lid-driven T-shaped porous cavity to improve the nanofluids mixed convection heat transfer. | 2017 | . Journal of Molecular Liquids | M. Hatami, J. Zhou, J. Geng, D. Song, D. Jing: | 231 |
توضیحات |
| 15 | Thermal performance evaluation of alumina-water nanofluid in an inclined direct absorption solar collector (IDASC) using numerical method. | 2017 | Journal of Molecular Liquids | M. Hatami, S. Mosayebidorcheh, D. Jing | 231 |
توضیحات |
| 16 | Thermal boundary layer analysis of nanofluid flow past over a stretching flat plate in different transpiration conditions by using DTM-Padé method | 2017 | jmcs | Majeed A. Yousif, Mohammad Hatami, Bewar Ahmed, Mohammad Mehdi Rashidi: | DOI:10.22436/jmcs.017.01.08 |
توضیحات |
| 17 | Experimental investigation of preparing and using the H2O based nanofluids in the heating process of HVAC system model | 2017 | International Journal of Hydrogen Energy | M. Hatami, G. Domairry, S.N. Mirzababaei: | DOI:10.1016/j.ijhydene.2016.12.104 |
توضیحات |
| 18 | Two-phase nanofluid condensation and heat transfer modeling using least square method (LSM) for industrial applications | 2017 | Heat and Mass Transfer | M. Hatami, S. Mosayebidorcheh, D. Jing | DOI:10.1007/s00231-016-1964-5 |
توضیحات |
| 19 | Nanoparticles migration around the heated cylinder during the RSM optimization of a wavy-wall enclosure. | 2017 | Advanced Powder Technology | Mohammad Hatami | DOI:10.1016/j.apt.2016.12.015 |
توضیحات |
| 20 | Optimization of the fuel rod's arrangement cooled by turbulent Nanofluids flow in pressurized water reactor (PWR). | 2016 | Chinese Journal of Chemical Engineering | M. Hatami, M.J.Z. Ganji, I. Sohrabi, D. Jing | 25(6)., |
توضیحات |
| 21 | Effect of inside heated cylinder on the natural convection heat transfer of nanofluids in a wavy-wall enclosure. | 2016 | International Journal of Heat and Mass Transfer | Mohammad Hatami, Safari: | 103 |
توضیحات |
| 22 | Design of microchannel heat sink with wavy channel and its time-efficient optimization with combined RSM and FVM methods | 2016 | International Journal of Heat and Mass Transfer | Jiandong Zhou, M. Hatami, Dongxing Song, Dengwei Jing | 103 |
توضیحات |
| 23 | Forced convection of Al2O3–water nanofluid flow over a porous plate under the variable magnetic field effect. | 2016 | International Journal of Heat and Mass Transfer | Mohammad Hatami, M. Khazayinejad, D. Jing: | 102 |
توضیحات |
| 24 | Erratum to: Differential transformation method for Newtonian and Non-Newtonian fluids flow analysis: comparison with HPM and numerical solution | 2016 | Journal of the Brazilian Society of Mechanical Sciences and Engineering | M. Hatami, J. Hatami, M. Jafaryar, G. Domairry: | 38(6)., |
توضیحات |
| 25 | Analysis of turbulent MHD Couette nanofluid flow and heat transfer using hybrid DTM-FDM. | 2016 | Particuology | S. Mosayebidorcheh, M. Sheikholeslami, M. Hatami, D.D. Ganji | 26:95-101., |
توضیحات |
| 26 | Boundary layer flow analysis of a nanofluid past a porous moving semi-infinite flat plate by optimal collocation method | 2016 | Powder Technology | M. Khazayinejad, M. Hatami, D. Jing, M. Khaki, G. Domairry | 301 |
توضیحات |
| 27 | Optimization of a circular-wavy cavity filled by nanofluid under the natural convection heat transfer condition | 2016 | International Journal of Heat and Mass Transfer | M. Hatami, D. Song, D. Jing: | DOI:10.1016/j.ijheatmasstransfer.2016.03.063 |
توضیحات |
| 28 | Nanoparticles effects on MHD fluid flow over a stretching sheet with solar radiation: A numerical study | 2016 | . Journal of Molecular Liquids | Seiyed E. Ghasemi, M. Hatami, D. Jing, D.D. Ganji: | 219 |
توضیحات |
| 29 | Analytical and numerical investigation of nanoparticle effect on peristaltic fluid flow in drug delivery systems. | 2016 | . Journal of Molecular Liquids | Seiyed E. Ghasemi, M. Vatani, M. Hatami, D.D. Ganji | DOI:10.1016/j.molliq.2015.12.001 |
توضیحات |
| 30 | Prediction of hydrodynamic and optical properties of TiO 2 /water suspension considering particle size distribution | 2016 | . International Journal of Heat and Mass Transfer | Dongxing Song, Mohammad Hatami, Yechun Wang, Dengwei Jing, Yang Yang: | 92 |
توضیحات |
| 31 | Three-dimensional and two-phase nanofluid flow and heat transfer analysis over a stretching infinite solar plate. | 2016 | Thermal Science | Mohammad Hatami, Mehdi Khazayinejad, Jiandong Zhou, Dengwei Jing | DOI:10.2298/TSCI160614266H |
توضیحات |
| 32 | Thermal and fluid analysis on effects of a nanofluid outside of a stretching cylinder with magnetic field using the differential quadrature method | 2015 | DOI:10.15632/jtam-pl.54.2.517 | S.E. Ghasemi, M. Hatami, A. Salarian, G. Domairry: | DOI:10.15632/jtam-pl.54.2.517 |
توضیحات |
| 33 | Numerical optimization of the asymmetric blades mounted on a vertical axis cross-flow wind turbine. | 2015 | International Communications in Heat and Mass Transfer 1 | M. Jafaryar, R. Kamrani, M. Gorji-Bandpy, M. Hatami, D.D. Ganji: | 70 |
توضیحات |
| 34 | Analytical thermal study on nonlinear fundamental heat transfer cases using a novel computational technique | 2015 | Applied Thermal Engineering | Seiyed E. Ghasemi, Ali Zolfagharian, M. Hatami, D.D. Ganji: | 98:88-97 |
توضیحات |
| 35 | Optimization analysis of convective–radiative longitudinal fins with temperature-dependent properties and different section shapes and materials. | 2015 | Energy Conversion and Management | S. Mosayebidorcheh, M. Hatami, T. Mosayebidorcheh, D.D. Ganji: | 106 |
توضیحات |
| 36 | Investigation of third-grade non-Newtonian blood flow in arteries under periodic body acceleration using multi-step differential transformation method | 2015 | Applied Mathematics and Mechanics | M. Hatami, S. E. Ghasemi, S. A. R. Sahebi, S. Mosayebidorcheh, D. D. Ganji, J. Hatami: | 36(11)., |
توضیحات |
| 37 | Experimental optimization of the vanes geometry for a variable geometry turbocharger (VGT) using a Design of Experiment (DoE) approach | 2015 | Energy Conversion and Management | M Hatami, M C M Cuijpers, M.D. Boot | 106 |
توضیحات |
| 38 | Numerical analysis of nanofluid flow conveying nanoparticles through expanding and contracting gaps between permeable walls. | 2015 | Journal of Molecular Liquids | M. Hatami, S.A.R. Sahebi, A. Majidian, M. Sheikholeslami, D. Jing, G. Domairry: | 212 |
توضیحات |
| 39 | Numerical investigation of nanofluid spraying on an inclined rotating disk for cooling process | 2015 | Journal of Molecular Liquids | M. Sheikholeslami, M. Hatami, D.D. Ganji | 577-583., |
توضیحات |
| 40 | An efficient approach to study the pulsatile blood flow in femoral and coronary arteries by Differential Quadrature Method | 2015 | Physica A: Statistical Mechanics and its Applications | Seiyed E. Ghasemi, M. Hatami, J. Hatami, S.A.R. Sahebi, D.D. Ganji | 443 |
توضیحات |
| 41 | Investigation of Transient MHD Couette flow and Heat Transfer of Dusty Fluid with Temperature-Dependent Properties | 2015 | Journal of Applied Fluid Mechanics | sobhan mosayebidorcheh, M. Hatami, D.D. Ganji, Taha Mosayebidorcheh, S. M. Mirmohammadsadeghi | 8(4)., |
توضیحات |
| 42 | : Effect of periodic body acceleration and pulsatile pressure gradient pressure on non-Newtonian blood flow in arteries | 2015 | . Journal of the Brazilian Society of Mechanical Sciences and Engineering | S. Mosayebidorcheh, M. Hatami, T. Mosayebidorcheh, D. D. Ganji | 38(3)., |
توضیحات |
| 43 | Heat transfer and flow analysis of nanofluid flow between parallel plates in presence of variable magnetic field using HPM | 2015 | Journal of Magnetism and Magnetic Materials | M. Hatami, Dengwei Jing, Dongxing Song, M. Sheikholeslami, D.D. Ganji: | 396 |
توضیحات |
| 44 | Non-spherical particles sedimentation in an incompressible Newtonian medium by Padé approximation | 2015 | Powder Technology | A.S. Dogonchi, M. Hatami, Kh. Hosseinzadeh, G. Domairry | 278 |
توضیحات |
| 45 | Comparative study of different exhaust heat exchangers effect on the performance and exergy analysis of a diesel engine | 2015 | Applied Thermal Engineering | M. Hatami, M.D. Boot, D.D. Ganji, M. Gorji-Bandpy | 90 |
توضیحات |
| 46 | Experimental investigations of diesel exhaust exergy recovery using delta winglet vortex generator heat exchanger | 2015 | International Journal of Thermal Sciences | M. Hatami, D.D. Ganji, M. Gorji-Bandpy | 63 |
توضیحات |
| 47 | Investigations of fin geometry on heat exchanger performance by simulation and optimization methods for diesel exhaust application | 2015 | Neural Computing and Applications | Mohammad Hatami, D.D. Ganji, M. Gorji-Bandpy | DOI:10.1007/s00521-015-1973-1 |
توضیحات |
| 48 | Heat Transfer Study on Convective–Radiative Semi-Spherical Fins with Temperature-Dependent Properties and Heat Generation using Efficient Computational Methods. | 2015 | Applied Thermal Engineering | S.A. Atouei, Kh. Hosseinzadeh, M. Hatami, Seiyed E. Ghasemi, S.A.R. Sahebi, D.D. Ganji | 89 |
توضیحات |
| 49 | Experimental and numerical analysis of the optimized finned-tube heat exchanger for OM314 diesel exhaust exergy recovery | 2015 | Energy Conversion and Management | Mohammad Hatami, D.D. Ganji, M. Gorji-Bandpy | 06 |
توضیحات |
| 50 | Experimental and numerical analysis of the optimized finned-tube heat exchanger for OM314 diesel exhaust exergy recovery | 2015 | Energy Conversion and Management | Mohammad Hatami, D.D. Ganji, M. Gorji-Bandpy: | 97:26-41 |
توضیحات |
| 51 | Numerical optimization of microchannel heat sink (MCHS) performance cooled by KKL based nanofluids in saturated porous medium | 2015 | Journal of the Taiwan Institute of Chemical Engineers | O. Pourmehran, M. Rahimi-Gorji, M. Hatami, S.A.R. Sahebi, G. Domairry | 55 |
توضیحات |
| 52 | Motion analysis of a spherical solid particle in plane Couette Newtonian fluid flow. | 2015 | Powder Technology | A.S. Dogonchi, M. Hatami, G. Domairry: | 274 |
توضیحات |
| 53 | Experimental study on the water inlet and outlet position of a solar collector reservoir for maximum efficiency | 2015 | Journal of Mechanical Science and Technology | S. Khodadadi, A. Ghanavati, M. R. Assari, M. Hatami, D.D. Ganji | ; 29(5):2279-2284., |
توضیحات |
| 54 | Non-spherical particles sedimentation in an incompressible Newtonian medium by Pade approximation. | 2015 | Powder Technology | A.S. Dogonchi, M. Hatami, Kh. Hosseinzadeh, G. Domairry: | 03 |
توضیحات |
| 55 | Study on Blood flow containing Nanoparticles trough porous arteries in presence of magnetic field using analytical methods | 2015 | Physica E Low-dimensional Systems and Nanostructures | Mohammad Hatami, Seiyed E. Ghasemi, A. Kalani Sarokolaie, D.D. Ganji | 70 |
توضیحات |
| 56 | Statistical optimization of microchannel heat sink (MCHS) geometry cooled by different nanofluids using RSM analysis | 2015 | European Physical Journal Plus | M. Rahimi-Gorji, O. Pourmehran, M. Hatami, D. D. Ganji | 130(2)., |
توضیحات |
| 57 | Differential transformation method for Newtonian and Non-Newtonian fluids flow analysis: comparison with HPM and numerical solution | 2015 | Journal of the Brazilian Society of Mechanical Sciences and Engineering | M. Hatami, J. Hatami, M. Jafaryar, G. Domairry | 38(2):1-11., |
توضیحات |
| 58 | Numerical simulation of two phase unsteady nanofluid flow and heat transfer between parallel plates in presence of time dependent magnetic field | 2015 | . Journal of the Taiwan Institute of Chemical Engineers | M. Sheikholeslami, M. Hatami, G. Domairry | 46:43-50 |
توضیحات |
| 59 | Experimental and thermodynamical analyses of the diesel exhaust vortex generator heat exchanger for optimizing its operating condition | 2015 | Applied Thermal Engineering | M. Hatami, D.D. Ganji, M. Gorji-Bandpy | 75:580-591 |
توضیحات |
| 60 | Analytical study of micropolar fluid flow and heat transfer in a channel with permeable walls | 2015 | Journal of Molecular Liquids | M. Fakour, A. Vahabzadeh, D. D. Ganji, M. Hatami | 204 |
توضیحات |
| 61 | Heat transfer study on solid and porous convective fins with temperature-dependent heat generation using efficient analytical method | 2014 | Journal of Central South University of Technology | S. E. Ghasemi, P. Valipour, M. Hatami, D. D. Ganji | 21(12)., |
توضیحات |
| 62 | CFD simulation and optimization of ICEs exhaust heat recovery using different coolants and fin dimensions in heat exchanger | 2014 | Neural Computing and Applications | M. Hatami, D. D. Ganji, M. Gorji-Bandpy: | 25(7-8):2079-2090 |
توضیحات |
| 63 | Analysis of turbulent MHD Couette nanofluid flow and heat transfer using hybrid DTM–FDM | 2014 | Particuology | S. Mosayebidorcheh, M. Sheikholeslami, M. Hatami, D.D. Ganji: | j.partic.2014.07.004 |
توضیحات |
| 64 | Numerical study of finned type heat exchangers for ICEs exhaust waste heat recovery. | 2014 | Case Studies in Thermal Engineering | M. Hatami, D.D. Ganji, M. Gorji-Bandpy | 4(C)., |
توضیحات |
| 65 | Transient combustion analysis for Iron micro-particles in a gaseous media by weighted residual methods (WRMs). | 2014 | Case Studies in Thermal Engineering | M. Hatami, D.D. Ganji, M. Jafaryar, F. Farkhadnia | 4(C)., |
توضیحات |
| 66 | Thermal analysis of convective fin with temperature-dependent thermal conductivity and heat generation. | 2014 | Case Studies in Thermal Engineering | Seiyed E. Ghasemi, M. Hatami, D.D. Ganji | 4(C)., |
توضیحات |
| 67 | Optimization of finned-tube heat exchangers for diesel exhaust waste heat recovery using CFD and CCD techniques | 2014 | International Communications in Heat and Mass Transfer | M. Hatami, M. Jafaryar, D.D. Ganji, M. Gorji-Bandpy | 57 |
توضیحات |
| 68 | Numerical study of MHD two-phase Couette flow analysis for fluid-particle suspension between moving parallel plates | 2014 | Journal of the Taiwan Institute of Chemical Engineers | M. Hatami, Kh. Hosseinzadeh, G. Domairry, M.T. Behnamfar | 45(5)., |
توضیحات |
| 69 | A review of different heat exchangers designs for increasing the diesel exhaust waste heat recovery. | 2014 | Renewable and Sustainable Energy Reviews | M. Hatami, D.D. Ganji, M. Gorji-Bandpy | 37:168–181 |
توضیحات |
| 70 | Refrigeration efficiency analysis for fully wet semi-spherical porous fins | 2014 | Energy Conversion and Management | M. Hatami, GH.R. Mehdizadeh Ahangar, D.D. Ganji, K. Boubaker | 84:533–540., |
توضیحات |
| 71 | High accuracy analysis for motion of a spherical particle in plane Couette fluid flow by Multi-step Differential Transformation Method | 2014 | Powder Technology | M. Hatami, M. Sheikholeslami, G. Domairry | 260:59–67 |
توضیحات |
| 72 | Nanofluid flow and heat transfer in an asymmetric porous channel with expanding or contracting wall | 2014 | . Journal of Molecular Liquids | M. Hatami, M. Sheikholeslami, D.D. Ganji | ; 195:230–239 |
توضیحات |
| 73 | Analytical investigation of MHD nanofluid flow in non-parallel walls | 2014 | Journal of Molecular Liquids | Mohammad Hatami, Mohsen Sheikholeslami, M. Hosseini, Davood Domiri Ganji: | 194:251-259 |
توضیحات |
| 74 | Three weighted residual methods based on Jeffery-Hamel flow. | 2014 | International Journal of Numerical Methods for Heat and Fluid Flow | D.D. Ganji, Mohammad Hatami | 24(3)., |
توضیحات |
| 75 | : Unsteady sedimentation analysis of spherical particles in Newtonian fluid media using analytical methods | 2014 | DOI:10.1016/j.jppr.2014.05.003 | R. Nouri, D.D. Ganji, M. Hatami | 3(2)., |
توضیحات |
| 76 | Thermal behavior of longitudinal convective–radiative porous fins with different section shapes and ceramic materials (SiC and Si3N4). | 2014 | Ceramics International | M. Hatami, D.D. Ganji | 40(5):6765–6775., |
توضیحات |
| 77 | Micropolar fluid flow and heat transfer in a permeable channel using analytical method | 2014 | Journal of Molecular Liquids | M. Sheikholeslami, M. Hatami, D.D. Ganji | 194:30–36., |
توضیحات |
| 78 | MHD nanofluid flow analysis in divergent and convergent channels using WRMs and numerical method. | 2014 | . International Journal of Numerical Methods for Heat and Fluid Flow | M. Hatami, D. D. Ganji | 24(5) |
توضیحات |
| 79 | Motion of a spherical particle on a rotating parabola using Lagrangian and high accuracy Multi-step Differential Transformation Method | 2014 | Powder Technology | M. Hatami, D.D. Ganji | 258:94–98 |
توضیحات |
| 80 | A comprehensive analysis of the flow and heat transfer for a nanofluid over an unsteady stretching flat plate. | 2014 | Powder Technology | A.R. Ahmadi, A. Zahmatkesh, M. Hatami, D.D. Ganji | 258:125–133 |
توضیحات |
| 81 | queezing Cu-water nanofluid flow analysis between parallel plates by DTM-Padé Method. | 2014 | Journal of Molecular Liquids | G. Domairry, M. Hatami | 193:37–44 |
توضیحات |
| 82 | Experimental investigation of exhaust temperature and delivery ratio effect on emissions and performance of a gasoline–ethanol two-stroke engine. | 2014 | Case Studies in Thermal Engineering | Mohsen Ghazikhani, Mohammad Hatami, Behrouz Safari, Davood Domiri Ganji | ; 2:82–90 |
توضیحات |
| 83 | Natural convection of sodium alginate (SA) non-Newtonian nanofluid flow between two vertical flat plates by analytical and numerical methods | 2014 | Case Studies in Thermal Engineering | M. Hatami, D.D. Ganji | 2:14–22 |
توضیحات |
| 84 | Motion of a spherical particle in a fluid forced vortex by DQM and DTM | 2014 | Particuology | M. Hatami, D. D. Ganji | 16 |
توضیحات |
| 85 | Transient vertically motion of a soluble particle in a Newtonian fluid media | 2014 | Powder Technology | M. Hatami, G. Domairry | 253:481-485 |
توضیحات |
| 86 | Effect of speed and load on exergy recovery in a water-cooled two stroke gasoline-ethanol engine for bsfc reduction purposes | 2014 | Scientia Iranica | Mohammad Hatami, M. Ghazikhani, B. safari | 2(1):171-180. |
توضیحات |
| 87 | : Laminar flow and heat transfer of nanofluid between contracting and rotating disks by least square method. | 2014 | Powder Technology | M. Hatami, M. Sheikholeslami, D. D. Ganji | 253:769-779 |
توضیحات |
| 88 | Thermal and flow analysis of microchannel heat sink (MCHS) cooled by Cu-water nanofluid using porous media approach and least square method | 2014 | Energy Conversion and Management | M. Hatami, D.D. Ganji | 78:347–358 |
توضیحات |
| 89 | Heat transfer and nanofluid flow in suction and blowing process between parallel disks in presence of variable magnetic field | 2014 | . Journal of Molecular Liquids | M. Hatami, D.D. Ganji | 190:159–168., |
توضیحات |
| 90 | Nanofluid flow and heat transfer in a rotating system in the presence of a magnetic field | 2014 | Journal of Molecular Liquids | M. Sheikholeslami, M. Hatami, D.D. Ganji | 190:112–120., |
توضیحات |
| 91 | Thermal management of double pipe air to water heat exchanger. | 2014 | Energy and Buildings | Mohsen Sheikholeslami, M. Hatami, M. Jafaryar, F. Farkhadnia, Davood Domiri Ganji, Mofid Gorji-Bandpy | 88 |
توضیحات |
| 92 | Thermal performance of circular convective-radiative porous fins with different section shapes and materials. | 2013 | Energy Conversion and Management | M. Hatami, D.D. Ganji | 76:185-193., |
توضیحات |
| 93 | Experimental investigation of performance improving and emissions reducing in a two stroke SI engine by using ethanol additives | 2013 | DOI:10.1016/j.jppr.2013.10.002 | Mohsen Ghazikhani, Mohammad Hatami, Behrouz Safari, Davood Domiri Ganji | ; 2(4)., |
توضیحات |
| 94 | Heat transfer and flow analysis for SA-TiO2 non-Newtonian nanofluid passing through the porous media between two coaxial cylinders | 2013 | Journal of Molecular Liquids | M. Hatami, D.D. Ganji | ; 188:155–161 |
توضیحات |
| 95 | Computer simulation of MHD blood conveying gold nanoparticles as a third grade non-Newtonian nanofluid in a hollow porous vessel | 2013 | Computer methods and programs in biomedicine | M Hatami, J Hatami, D D Ganji: | 113(2)., |
توضیحات |
| 96 | Forced convection analysis for MHD Al2O3-water nanofluid flow over a horizontal plate | 2013 | Journal of Molecular Liquids | M. Hatami, R. Nouri, D. D. Ganji | 187:294-301., |
توضیحات |
| 97 | Analytical thermal analysis of air-heating solar collectors. | 2013 | . Journal of Mechanical Science and Technology | S. E. Ghasemi, M. Hatami, D. D. Ganji | ; 27(11)., |
توضیحات |
| 98 | Heat transfer study through porous fins (Si3N4 and AL) with temperature-dependent heat generation | 2013 | Energy Conversion and Management | M. Hatami, A. Hasanpour, D. D. Ganji | 74:9–16 |
توضیحات |
| 99 | Temperature Variations Analysis for Condensed Matter Micro- and Nanoparticles Combustion Burning in Gaseous Oxidizing Media by DTM and BPES | 2013 | DOI:10.1155/2013/129571 | M. Hatami, D.D. Ganji, Karem Boubaker | 24 |
توضیحات |
| 100 | Propulsion and launching analysis of variable-mass rockets by analytical methods | 2013 | jppr | D.D. Ganji, M. Gorji, M. Hatami, A. Hasanpour, N. Khademzadeh | 09 |
توضیحات |
| 101 | Analytical investigation of MHD nanofluid flow in a semi-porous channel. | 2013 | Powder Technology | M. Sheikholeslami, M. Hatami, D. D. Ganji | 09 |
توضیحات |
| 102 | Launching Process for Variable-Mass Rockets by Series Solution. | 2013 | JMET0101003 | M. Gorji, D. D. Ganji, M. Hatami, A. Hasanpour, A. K. Hossein: | 06 |
توضیحات |
| 103 | Efficient Analytical Approaches for Motion of a Spherical Solid Particle in Plane Couette Fluid Flow using Nonlinear Methods. | 2013 | International Journal of Applied Mathematics and Computer Science | S.E.Ghasemi, S.Jalili Palandi, M.Hatami, D.D.Ganji | 03 |
توضیحات |
| 104 | Efficient Analytical Approaches for Motion of a Spherical Solid Particle in Plane Couette Fluid Flow using Nonlinear Methods | 2013 | International Journal of Applied Mathematics and Computer Science | S.E.Ghasemi, S.Jalili Palandi, M.Hatami, D.D.Ganji | 03 |
توضیحات |
| 105 | The Effect of Alcoholic Fuel Additives on Exergy Parameters and Emissions in a Two Stroke Gasoline Engine | 2013 | ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING | M. Ghazikhani, M. Hatami, B. Safari: | 39(3):2117-2125 |
توضیحات |
| 106 | Differential Transformation Method for Newtonian and non-Newtonian nanofluids flow analysis: Compared to numerical solution. | 2013 | AEJ - Alexandria Engineering Journal | M. Hatami, D. Jing: | 55(2) |
توضیحات |
| 107 | Deflection prediction of a cantilever beam subjected to static co-planar loading by analytical methods | 2013 | DOI:10.1016/j.hbrcj.2013.11.003 | M. Hatami, S. Vahdani, D.D. Ganji | 10(2)., |
توضیحات |
| 108 | Exergy recovery from the exhaust cooling in a DI diesel engine for BSFC reduction purposes. | 2013 | Energy | Mohsen Ghazikhani, Mohammad Hatami, Davood Domiri Ganji, Mofid Gorji-Bandpy, Ali Behravan, Gholamreza Shahi: | 65 |
توضیحات |
| 109 | Electrohydrodynamic flow analysis in a circular cylindrical conduit using Least Square Method | 2013 | Journal of Electrostatics | S.E. Ghasemi, M. Hatami, G.H.R. Mehdizadeh Ahangar, D.D. Ganji | 72(1). |
توضیحات |
| 110 | Investigation of Refrigeration Efficiency for Fully Wet Circular Porous Fins with Variable Sections by Combined Heat and Mass Transfer Analysis | 2013 | International Journal of Refrigeration | M. Hatami, D.D. Ganji | 40 |
توضیحات |
| 111 | Slope variation effect on large deflection of compliant beam using analytical approach | 2012 | Structural Engineering & Mechanics | A. Khavaji, D.D. Ganji, N. Roshan, R. Moheimani, M. Hatami, A. Hasanpour | 44(3) |
توضیحات |
| 112 | Efficient Analytical Approaches for Motion of a Spherical Solid Particle in Plane Couette Fluid Flow using Nonlinear Methods | 2012 | International Journal of Applied Mathematics and Computer Science | S.E.Ghasemi, S.Jalili Palandi, M. Hatami, D.D.Ganji | |
توضیحات |